GRUBEE 2010 SkyHawk GT2B 48cc Angle Fire Slant Head Bike Motor Kit (Standard Finish)

SkyHawk 48cc Slant Head Bike Engine Standard Finish

GRUBEE SkyHawk GT2B 48cc Tool Kit Includes GRUBEE SkyHawk GT2B 48cc We cannot ship any 2-stroke Bicycle Motors or Bike Engine Kits to California due to CARB regulations. Nationwide Access, LLC is an authorized distributor of Grubee Skyhawks in the U.S. and has an approved E.P.A. certification. GRUBEE SkyHawk GT2B 48cc Slant Head (Standard Finish) Bicycle Engine Kit FAQs: Question: How much weight will this engine kit add to a bike? Answer: The 48cc, 66cc/80cc engine kits will add 24 lbs to your bike. The 49cc engine kit will add 31 lbs to your bike. Note: We suggest a 26" Men's standard V frame bike. Question: What fuel do I use for this engine kit? Answer: This 2 stroke stroke motor kit requires an Oil And Gas Mixture as follows: When New: 16 to 1 (8oz per Gallon) After 2 Tanks Of Break In: 32 to 1 (4oz per Gallon) You should get 100-150 Miles per gallon and achieve 20-40 MPH depending on climate, altitude, bike weight and rider weight Question: How do I start and stop my bike with the GRUBEE SkyHawk GT2B 48cc? Answer: The starting and stopping of this two stroke motor kits is this: You can still pedal bike like normal with clutch lever held in or locked in with button. To Start: It's just like riding a bike normally, hold in the clutch and pedal the bike to get some speed, then release the clutch to "Jump Start" the motor. If you know of or remember jump starting a Manual VW Bug this start method is the same. To Stop: While the engine is running you can hold in the clutch and the engine will idle. Push the Kill Switch on the throttle to kill the motor. The clutch must be held in when the bike is in motion or the motor will keep running.

Bicycle Requirements:

This bicycle motor engine kit fits most Mens 24" and larger bicycles which includes mountain, cruiser, chopper and road bikes with a V-frame with at least a 8.5" height clearance for the engine. Larger frame size requires drilling into bike frame and use of the universal face plate.

Dimensions:

This 48cc bicycle motor engine kit is about 8.5" height 7" length 5" width and fits on most standard 24" – 26" or 25mm 29mm frame bicycle frame tubes. Larger frame size requires drilling into bike frame and use the universal face plate. This engine kit only adds about 24 lbs to your bike.

* Orders received Monday - Friday by 3:30PM PST
are eligible for Same Day Shipping!

We Cannot ship to PO BOXES at this time.
For International and Canadian shipping we suggest UPS STANDARD,
This does not cover Customs Brokerage, Duties, and Taxes… these are charged to the consignee on delivery).
We have found that this is the cheapest way to send packages Internationally and to Canada.

Skills And Experience:

The buyer may need some basic hardware skills, tools, and it takes roughly around 2-3 hours to install and to do some adjustments and fine tuning.

Notices And Disclaimer:

• We cannot guarantee that this kit will fit your specific individual bike(s).
• Due to California Air Resource Board (CARB) regulations we cannot sell to California Residence at this time.
• Operating a bike, motorized bicycle or bike with a bicycle engine kit installed involves some risk of serious bodily injury. Buyer accepts responsibility for any and all vehicle operation that may lead to personal injury, economic loss, social distress, other losses, costs and damages.
• Seller is not responsible for injuries and/or damages resulting from operating this motorized bicycle or bicycle engine kit.
• Seller is not responsible for misuse of this kit or any warranty after installation.
• Not all motorized bicycles are allowed for on road use.
• We make no guarantee as to the road legality of these bike motors.

GRUBEE 2010 SkyHawk GT2B 48cc Slant Head (Standard Finish) Bicycle Engine Kit - Specifications

This 48cc puts out 1.95 – 2.2 HP

Gas And Oil Mixture For Fuel Ratio: (Use of a synthetic 2 stroke oil is recommended.) This bicycle motor engine kit is a 2 cycle/2 stroke design, therefore, a gasoline/oil mixture is necessary as follows: When New: 16 to 1 (8oz per Gallon) After 2 Tanks Of Break In: 32 to 1 (4oz per Gallon) The engine crankshaft bearings are lubricated from the oil in the gas mix. A rich break in oil mixture ensures bearings will not cease during engine break in period.

We cannot ship ANY Bicycle Motors or Bike Engine Kits to California due to CARB regulations.

Please Tell a Friend about this product and help spread the word about Motorized Bicycles.

* Orders received Monday - Friday by 3:30PM PST
are eligible for Same Day Shipping!

GRUBEE 2010 SkyHawk GT2B 48cc (Standard Finish) - Support

Besides our online support materials such as our numerous Bicycle Motor Installation Manuals and Installation Video.

Please review our Support options here:

- Bicycle Motor Engine Installation Video
- Bicycle Motor Installation Manuals
- Over 300 Fine Tuning Tips & Suggestions
- Bicycle Motor Parts

We cannot ship ANY Bicycle Motors or Bike Engine Kits to California due to CARB regulations.

* Orders received Monday - Friday by 3:30PM PST
are eligible for Same Day Shipping!